The exterior lather is a PH balanced, hyper-concentrated cleaning agent (soap, if you will) that will aid in the removal of dirt, road debris, oils, and other contaminants during the washing process. Highly effective at cleaning glossy or matte surfaces without stripping any underlying protective treatments. Designed to be safe and effective for use on aviation, automotive, marine, rv, motorcycle, and commercial vehicles. Our hyper-concentrated formulation is usable down to an 1850 : 1 (water : product) ratio depending on desired strength with the use of foam cannons, low-pressure soap sprayers, wash buckets, or commercial wash stations.
HOW TO USE
Protect sensitive areas, intake cavities, and electrical components that may become damaged during the exterior vehicle washing process. It is advised not to let the exterior lather dry on surfaces. first, rinse areas with water to remove loose debris before washing with exterior lather. Use a microfiber towel, wash mitt, sponge, or detailing brush to assist in the decontamination process. After cleaning the vehicle, rinse surfaces clean before drying.
TDF TIP: When using spray equipment, mix the solution by first filling the container with water before adding the exterior lather, then lightly shake the container for full mixing. When using a bucket system, fill bucket one third with water before adding the exterior lather and filling the remainder of the bucket allowing the solution to create a thick lather during final mixing.
MIXING RATIOS (SUGGESTED):
Foam cannon: 32oz water : 0.5oz
Air assisted foam: 32oz water : 0.25oz
Low-pressure sprayer: 8oz water : 0.25oz
Bucket: 5gal water : 0.5oz