Description
/ZERO: Decontamination Shampoo is a premium deep cleansing car shampoo that is super concentrated with advanced detergents, emulsifiers and lubrication system for optimal cleaning performance.
Utilising premium grade surfactants and high foaming action to intensively tackle traffic film, grease and grime, /ZERO: Decontamination Shampoo is the perfect start to any good decon process for your vehicle.
When to use /ZERO: Decon Shampoo?
1. When car is really dirty.
2. When you want to strip a car of OLD waxes and synthetic sealants.
3. Restore clogged up ceramic coatings. Used every quarter or twice a year will do the coatings a lot of good.
Can it strip protection?
Yes absolutely. It depends on a number of factors such as how fresh the protection is, the type and its chemical resiliency. It may take slightly higher dilution ratios and multiple hits to strip the protection off fully.
Do professional detailers love this product?
You bet! we have received amazing feedback from industry professionals on just how effective /ZERO: Decon Shampoo is.
During the decon process before paint correction, /ZERO: Decon Shampoo will greatly aid the professional during the wash stage to get the paint as clean as possible before claying and polishing.
This deep cleanse will maximise a clay bars life which will also lead to the increase correction performance due to the paint surface being free of contaminants.
Can you recommend some dilution ratios for the various uses?
Snow foam lance:
1:10
Pre-wash (Pump Sprayer):
1:75 Maintenance Cleaning
1:50 Light Dirt
1:25 Medium to Heavy Dirty
1:10 Heavy Duty Cleaning
Foam sprayer:
10ml to 500ml of water. It is key not to fill up the chamber completely to allow enough air and therefore pressure to build up.
Trigger Sprayer Bottle:
engine bay cleaning 1:30
wheels and tyres 1:10 or 1:20
rubber sills 1:10 or 1:20
-
Instructions
HOW TO USE
1. Shake well before use. Fill your 4-5 gallon wash bucket with warm water. add 50ml for a deep cleansing wash or 65ml for a strong decon wash on heavily soiled vehicles.
2. Pre-rinse the car to remove any loose dirt.
3. Wash the vehicle out of direct sunlight, starting from the top, working your way down the vehicle. Do not apply onto hot surfaces and do not allow the product to dry on the surface.
4. Rinse thoroughly.
FOR BEST RESULTS
1. For old wax and sealant removal, use a dilution of 50ml product to 400ml of warm water in the foam lance bottle.
2. Mix thoroughly in the foam lance bottle and Spray onto the car at a high foaming setting.
3. Allow to dwell for 4-5 minutes and do not allow to dry.
4. Rinse off thoroughly.
5. Wash vehicle with /ZERO: Decontamination Shampoo and the two bucket Wash method.